Robotics Sportster Flash x2 Guide de l'utilisateur télécharger pdf (Page 62)

58 Sportster Flash x2 - User’s Guide

S13 0 Bit-mapped register. Select the bit(s) you

want on and set S13 to the total of the

values in the Value column. For example,

ATS13 = 17 enables bit 0 (value is 1) and

bit 4 (value is 16).

Bit Value Result

0 1 Reset when DTR drops.

1 2 Reset non-MNP transmit

buffer from 1.5K to 128

bytes.*

2 4 Set backspace key to delete.

3 8 On DTR signal, auto dial the

number stored in NVRAM at

position 0.

4 16 At power on/reset, Auto Dial

the number stored in NVRAM

at position 0.

5 32 Reserved.

6 64 Reserved.

7 128 Disconnect on escape code.

* The 1.5K-byte non-ARQ buffer allows data transfer with Xmodem- and

Ymodem-type file transfer protocols without using flow control.

The 128-byte option lets remote users with slower modems keep data

you’re sending from scrolling off their screens. When remote users

send your computer an XOFF (Ctrl-S) and you stop transmitting, the

data in transit from your modem’s buffer doesn’t exceed the size of

their screen.

This is also very helpful in situations when a remote modem/printer

application is losing characters.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 70 71

Pas de commentaire

Robotics Sportster Flash x2 Guide de l'utilisateur Page 62