Robotics Sportster Flash x2 Guide de l'utilisateur télécharger pdf (Page 61)

Sportster Flash x2 - User’s Guide 57

S10 7 Sets the duration, in tenths of a second, that

the modem waits after loss of carrier before

hanging up. This guard time allows the

modem to distinguish between a line hit, or

other disturbances that momentarily break the

connection, from a true disconnect (hang up)

by the remote modem.

While we don’t recommend connecting the

modem to a line with call waiting, if you have

it, you may wish to adjust this setting upward

to prevent the modem from misinterpreting

the second call signal as a disconnect by the

remote modem. A better alternative is to ask

your phone company how to temporarily

disable call waiting (usually *70). For

example: ATDT *70 phone number.

Note: If you set S10 = 255, the modem will

not hang up when carrier is lost. Dropping

DTR hangs up the modem.

S11 72 Sets the duration and spacing, in

milliseconds, for tone dialling.

S12 50 Sets the duration, in fiftieths of a second, of

the guard time for the escape code

sequence.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 70 71

Pas de commentaire

Robotics Sportster Flash x2 Guide de l'utilisateur Page 61