Robotics COURIER Spécifications télécharger pdf (Page 37)

4-6 Courier V.Everything External Modem: Getting Started

Getting Information About Calls

Here are the commands that provide detailed information about

your current settings and current and last calls.

To get call-in-progress data and current settings while you are

on line, set DIP switch 9 OFF and then send ATZ <Enter> (or

power the Courier off and then on).

Alternatively, you can send ATS14.0=0 <Enter>, but be aware

that the DIP switch setting will override your setting at power

on or reset (even if you add &W to write the command to

NVRAM).

Once you’ve set DIP switch 9 or sent ATS14.0=0 <Enter>, you

can type the following command to get to online command

mode, and the Courier will not hang up:

+++

To return on line, type:

ATO <Enter>

Current Settings

Current settings

ATI4

Data or fax mode

AT+FCLASS?

0=Data 1=Class 1 fax 2.0=Class 2.0 fax

Call in Progress

Speed

ATI6 — Speed

Duration

ATI6 — Current Call

Modulation

ATI11 — Modulation

Error control protocol

ATI6 — Protocol

Compression type

ATI6 — Compression

Data or fax mode

AT+FCLASS?

0=Data 1=Class 1 fax 2.0=Class 2.0 fax

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 63 64

Pas de commentaire

Robotics COURIER Spécifications Page 37